Interior configuration...
Size
The first issue to consider is the size of your system. The dimensions for each standard enclosure are shown below:
| height | width | depth | |
| serverStation | 955mm | 621mm | 800mm |
| avStation | 1750mm | 835mm | 800mm |
| netStation | 645mm | 620mm | 640mm |
| infoStation | 562mm | 496mm | 595mm |
You should select the cabinet that best fits your system - make sure this can comfortably accommodate your hardware. If you need greater capacity, contact us direct and we'll discuss the options open to you.
With our serverStation server cabinet you should bear in mind that the monitor will not be located within the cabinet, so it's not occupying around 400mm (or 9U) of space - you would need a standard 29U height cabinet to give you the same functionality (1U = 1.75" or 44.45mm).
Door
All TAG Technic cabinets are fitted with a 6mm acrylic panelled door and lockable catch as standard. Doors can be supplied for left or right hand hinge mounting. If you need to swap things around in future the hinges can be moved and the door lock repositioned.
Options: plastic laminate door panel; Vent-Flo door panel; smoked glass door panel
Monitor mounting
The surfaces of the serverStation, netStation and infoStation are capable of supporting a range of equipment. You can stand a monitor and keyboard on top of each unit, and there's a cable tidy on the side to route cables back to your hardware.
However, there are options to give you more space! The surface of each unit can be used to support a printer. Two separate monitor mounting options allow you to put the monitor on a pedestal on the left or right of the station. You can specify a home for your mouse.
Base mount: a platform that will take most free standing flat screen monitors. Supplied with 4 clamps to provide secure location.
Rear mount: designed for VESA standard flat screen mounting: 75mm and 100mm fixing centres.
Mouse tray: you can add a mouse tray to each of these mounts to take a standard mouse mat.